Parth Valves And Hoses LLP

• Blow out proof stem
• Mirror finish floating ball
• Compact design
• Low torque, less wear
• Quarter turn shut off
• A wide variety of end connections
• No lubrication required
• Lever position indicates the port direction
• Each valve individually tested
• Guaranteed performance

• Design Standard: Design generally conforms to ASME B 16.34-2004 / API6D / BSEN ISO 17292 (BS5351); DIN EN 12516 Also, IS9890-1981
• Construction Details: Single / Two / Three Piece Design / Side Entry / Trunnion / Full Bore/Reduced bore/ Block & Bleed / Soft and Metal Seated
• End Connection: Screwed, Socket Weld, Flanged, Butt-Weld, Triclover End, SMS/DIN union End.
• Operator / Actuator: Lever, Gear, Actuator (Pneumatic, and Electric Motorized)
• Special Service almost all designs in a special version as per customer’s Requirements. In this case, all the material details and technical features are given by the Customer & all Design aspects from us.

• PARTH VALVES AND HOSES has extensive experience in manufacturing floating ball valve as well as Trunnion Mounted Ball Valves, Full bore ball valve, Reduced bore ball valve, both Soft and Metal Seated.
• Design Standard: design generally conforms to ASME B 16.34-2004 / API6D / BSEN ISO 17292 (BS5351); DIN EN 12516 Also, IS9890-1981
• Test (Inspection) Standard: IS 6157-1981, BS 6755 Part 1/API 598
• Construction Details: Single / Two / Three Piece Design / Side Entry / Trunnion / Full Bore/Reduced bore/ Block & Bleed / Soft and Metal Seated
• End Connection: Screwed, Socket Weld, Flanged, Butt-Weld, Triclover End, SMS/DIN union End.
• Special Service almost all PARTH VALVES AND HOSES can designs in a special version as per customer’s Requirements. In this case, all the material details and technical features are given by the Customer & all Design aspects from us.

A Two Piece Ball Valve is a commonly used industrial valve designed for on/off flow control in pipelines. It gets its name from its two-part body construction, which makes it easier to maintain compared to one-piece valves.

• Two-piece body design: The valve body is split into two parts, allowing easier access for maintenance and cleaning.
• Ball mechanism: Uses a rotating ball with a hole (bore) to control flow.
• Quarter-turn operation: Only 90° rotation needed to open or close.
• Leak-tight sealing: Provides excellent shut-off performance.
• Threaded or flanged ends: Suitable for different piping systems.